Filter
Top Products
26
Still Playback (Pause)
Press the PAUSE button on the remote control or PLAY/STILL on the VCR to still
the tape during play.
The picture will "freeze". You may see some minor noise or interference on the screen.
This is normal.
• To resume play, press the PLAY button or PAUSE button again.
Note: The sound is muted and cannot be heard during "Special Playback Effects".
Notes:
• After 1 minute in the PAUSE mode, the VCR automatically switches to STOP mode to protect
the tape.
• If noise bars appear on the TV screen during the PAUSE mode, first set the VCR to the
SLOW mode by pressing the (4) button during playback and then press the CH ( or )
button on the remote control to minimize the noise bars (see page 25).
• If the screen jitters during PAUSE, press the CH ( or ) button to minimize the jitter.
If you press the DISPLAY button when viewing a video cassette, the display, as shown,
appears for several seconds so you can see the functions of the number buttons on the remote
control.
Number (4) button: Slow motion
Number (6) button: Frame advance
• The above function always work when you are viewing a video cassette even if the display,
as shown, is not displayed.
Frame Advance
1 Press the PAUSE button to stop the tape during playback.