Filter
Top Products
46
until the cable box changes channels. If the cable box channel does not change, you won't be
able to program the remote for your cable box.
Using the VCR remote to control your cable box
Remote Control Illustration
1 Press the "CATV" button on remote control.
2 Point VCR remote control toward cable box.
3 Press the CH (channel / ) button.
INTEGRATING YOUR STEREO SYSTEM WITH YOUR VCR
Hookup
When your VCR is connected to a stereo system, you can:
• Make high quality "audio only" recordings for up to 6 hours (on a T-120 video cassette
tape).
• Receive quality stereo sound from your VCR through your stereo system.
• Use the VCR as an extra audio tape deck for dubbing.
Stereo System Hookup Illustration
To record from stereo
BEFORE YOU BEGIN...
• Make sure the VCR is connected to your stereo system, as shown above.
• Make sure that "STEREO" audio is selected from the VCR Set-Up Menu, as shown on
Page 33, of "RECORDING OPERATION" Section, "Stereo vs. mono sound".
• Select VCR recording speed (SP or EP) as shown on page 30, of "RECORDING
OPERATIONS" Section, "Basic Recording Steps".
1 Press the AVX button on remote control, so that L (line) appears on the display.