Filter
Top Products
37
5 Press the GUIDE button to end the setting.
6 Follow the Step 1 through 5 on "Basic Recording Steps" on pages 30 and 31.
Stereo vs. mono sound
When you select the STEREO option in the initial setup operation, your VCR records in
stereo any station that broadcasts stereo sounds. When a TV channel broadcasts in
stereo, you'll see a stereo indicator on the TV screen.
Set to MONO if the stereo signal is weak and the sound is too "noisy".
Note: When you select MONO, sound is recorded as mono even when a channel broadcasts
in stereo.
INSTANT RECORDING TIMER
Using the Instant Recording Timer (IRT)
The Instant Recording Timer (REC/IRT button on the VCR) will let you make a
simplified timer recording without having to use the programming timer. In order to set
the IRT properly the clock must be set before starting.
1 Follow the steps 1 through 5 on "Basic recording steps" on pages 30 and 31.
2 Press the REC/IRT button twice to indicate the recording time on the display.
• You may increase the recording time by 30 minutes each time you press the REC/IRT
button.
• While you are recording, the remaining recording time is shown on the VCR display.
• At the end of your recording, the display will read "0:00", recording will stop
automatically, and the VCR will turn itself off.