Filter
Top Products
42
12 Press the POWER button to turn off the VCR.
The delayed recording indicator will display on the VCR.
This tells you that the VCR will automatically record at the times and dates you have
programmed.
• If you are using a cable box, you must select the channel you want to record on the
cable box (in this case 08); and turn on the cable box.
Note: You can correct any item entered as you go by pressing the CLEAR button repeatedly
until the digit to be corrected changes to white dash "-" on the screen. Then enter the correct
number. Illogical times and dates won't be accepted.
Remote Control Illustration
To stop recording while in the timed recording mode:
1 Press POWER button.
2 Press the STOP button within 10 seconds.
• This can be done either on the VCR or with the remote control.
When you have set up all the timed recordings you want:
• Don't forget to load a videocassette (with the safety tab still attached) to record on.
• If using a cable box, turn on the cable box and tune it to the channel you want to
record before the time the recording is to begin.
Important: Your timed recording settings take effect when you turn off the power on the
VCR.
PROGRAM REVIEW
Reviewing what you have programmed
You can look back over any of the recordings you have preset and if you need to, clear
out any of the programs. Normal programs will clear automatically once recording is
complete, but daily and weekly setting must be cleared out manually.
Remote illustration
1 Press the GUIDE button.
The main on-screen menu will appear on the TV screen.