Filter
Top Products
29
2 Press the (2) button to select the VCR SETUP operation.
3 Press the (4) button to select "HIFI" or "LINEAR".
• Select Hi-Fi to playback sound recorded on the Hi-Fi track and for normal use.
The L and R indicators will light in the VCR's display panel.
• Select LINEAR to play back the sound recorded on the linear monaural track. Also, if
the audio sounds distorted or unusual or there is no audio, select LINEAR.
4 Press the GUIDE button to end the setting.
USING THE "INDEX" FEATURE
To find specific sections on a tape using the "INDEX" feature
Jump to an Index Mark with INDEX
A quick way to access specific program segments is with the index search feature. This
lets you move through a tape that has several recordings on it by searching for the
INDEX "mark". This function only works with recordings that have been set up with
indexing. You create an INDEX mark (VISS signal) every time you pres the REC or
REC/IRT button while recording.