Filter
Top Products
Honeywell
115
Figure 6-31 The Date and Time Setup Menu
Please refer to the following sheet for detailed information.
Parameter Function
Channel Please select a channel first.
Pre-record
Please input pre-record value here.
System can record three to five seconds of video before
activating the record operation in the file. (Depends on data
size.)
Setup
In Figure 6-30, click Set, and
you can go to the corresponding
setup interface.
Please set schedule period and then select corresponding
record or snapshot type: schedule motion detection and alarm.
Please select date (Current setup applies to current day by
default. You can select the circle before the week to apply the
setup to the whole week.)
After setup is complete, please go back to Figure 6-30 and then
click Save to save the current time period setup.
Copy
It is a shortcut menu button. You can copy current channel
setup to one or more (all) channels. The interface is shown as
in Figure 6-29.
Save
You can click Save after you complete setup for one channel, or
you can complete the whole setups and then click Save.