Filter
Top Products
Honeywell
49
Boot up the DVR, and input the user name and password.
In the main menu, select SettingPan/Tilt/Zoom. The interface is shown
as in Figure 4-27. Here you can set the following items:
Channel: Select the channel connected with the speed dome video
port.
Protocol: Select the corresponding PTZ protocol (such as PELCOD).
Address: Identical to the device address set in the speed dome.
Default address is 1.
Baud rate: Select corresponding baud rate. 2400 for Pelco-D
protocol.
Data bits: Select corresponding data bits. Default value is 8.
Stop bits: Select corresponding stop bits. Default value is 1.
Parity: There are three options: Odd/Even/None. The default value
is None.
Figure 4-27 PTZ Setup Menu
After completing all the settings click Save.
In the single window display (View 1) mode, right-click to open the interface
shown in Figure 4-28 (by clicking Fn in the front pan
el or in the remote
controller will cause a menu to appear with only Pan/Tilt/Zoom and Color
Setting options). .