Filter
Top Products
Overview of Navigation and Controls
42
Figure 4-19 Menu of Camera Masking
Alarm Setup and Alarm Activation
Before operation, make sure you have properly connected alarm devices
such as the buzzer.
Go to alarm setup interface
On the main menu, from Setting to Alarm, you can see the alarm setup
interface. See Figure 4-20.
Alarm setup
Alarm interface is shown below. See Figure 4-20.
Alarm in: Allows you to select alarm input channel number.
Event type: Select local input. Network input is not effective in HSVR-
04 and HSVR-16.
Type: Normally open or normally closed.
PTZ activation: Here you can set PTZ movement when the alarm
occurs. For example, go to preset, tour& pattern when there is an