Filter
Top Products
GB18
User’s Manual
3. Installation Wizard
3.3 Channel Search
You can search channels automatically or manually. If you select
manual search, you have to set parameters for search.
• Search Type: Select Auto or Manual. If Manual is selected,
the following options will be activated.
• Frequency: Select frequency value using the / button
and press the OK button. If you wish to set the frequency
value, select User De ne, and enter the value using the
NUMERIC(0-9) buttons.
• Symbol Rate: Select the symbol rate using the / button
and press the OK or button. If the required value is not
listed, then select User De ne and enter the value using the
NUMERIC(0-9) buttons.
• Network Search: When using the network search, select
Enable. When entering the Network ID, select User De ne.
You can also disable the network search by selecting Disable.
Select Next and press the OK button to start channel search.
Please wait for nishing the channel search. If you want to stop
the operation during search, press the OK button.
If the channel search is stopped or nished, you can edit the
found channels.
• Select All: Select all the found channels.
• Unselect All: Unselect all the found channels.
• Delete: Delete the selected channels.
Select Save and press the OK button to save the result and go to the next step.