Filter
Top Products
GB46
User’s Manual
8. Installation
8.2 Linear Search
You can search channels by setting the range of frequencies and other parameters.
1. Start/End Frequency
1. Select Start/End Frequency using the / button and press
the OK or button.
2. Enter the frequency using the NUMERIC(0-9) buttons.
2. Step
1. Select Step using the / button and press the OK or
button.
2. Select an option among Auto, 250, 1000, 7000 and 8000
using the / button and press the OK button. If you do not
know the value, please select Auto. If the required value does
not exist, select User De ne and enter the value directly.
3. Network Search
1. Select Network Search using the / button and press the
OK or button.
2. Select an option among Disable, Enable and User De ne
using the / button and press the OK button.
3. When you select User De ne to set the network manually,
enter network value using the NUMERIC(0-9) buttons.