Filter
Top Products
**
• Channel Number
Select the number of VHF/UHF channel, in which the transport stream is transmitted by using
also the NUMERICAL(0~9) button. If the number is correct, the receiver will search any
services easily.
**
• Frequency
Enter the your desired frequency to search directly. When entering frequency, the appropriate
service for the entered frequency is automatically displayed on Service. When you enter the
frequency, you use the NUMERICAL(0~9) button.
**
• Mode
Select one option among Auto, 2K FFT and 8K FFT for service search. If you don't know the
value, please select Auto.
**
• Guard Interval
Select one option among Auto, 1/4,1/8,1/16 and 1/32 for service search. If you don't know the
value, please select Auto.
**
• Network Search
If specified frequency service information and other service information are provided together,
the service, which belongs to other frequency service, is also searched. Select Yes to search
all services in the network. If not, select No.
3. Default Search
Default Search restores the receiver to the default settings
Warning: Please Note that once you perform Default Search, all data such as Aerial Setting
information Service List, and User Configured data are deleted.
1. Select OK and press the OK
button to restore all
setting to Factory Default.
2. Select CANCEL and press the OK
button to cancel
default setting.
3. When default setting is completed, Automatic Search is
automatically displayed, which helps Service Search.
**
8. Installation
GB 38
**
**
**
**
**
**
**
**
**
**
**
**
**
**