Filter
Top Products
**
1. If new software is found when powering on
1. A message will be displayed to notify that new software is found.
2. Select Yes and press the OK
button to upgrade the software.
3. Starts downloading new software. Please wait until the upgraded is completed.
4. When completing the software upgrade, the equipment is automatically powered off and on
again.
2. STB Upgrade
You can perform STB Upgrade only if you know MUX information of software upgrade correctly.
1. Press the MENU
button.
2. Select Installation using the
button and press the
OK
button.
3. Select Status using the
button and press the OK
button.
4. Select STB Upgrade using the
button and press the
OK
button.
**
5. When prompting message is displayed to ask PIN code, enter the PIN code using the
NUMERICAL(0~9) button. The default PIN code is 0000.
6. Select Channel, Frequency, Mode or Guard Interval and press the OK
button to search
software.
7. It is displayed whether or not new software exist. If new software does not exist, a message
will display and press the OK
button to return to the STB Upgrade Menu.
8. Select Yes and press the OK
button to start updating. Select No and press the OK
button to return to the previous menu. Performs Software Upgrade. Please wait until it is
completed. When completing the software upgrade, the product is automatically powered off
and on again.
Note: How to setting parameters in STB Upgrade is the same as how to set parameters in
Custom Search . Refer to Custom Search.
**
**
GB 41
**
**
**
**
**
**
**
**
**
**
**
**
**
**