Filter
Top Products
10.Installation
In this chapter you can configure installation settings such as search channels, SMATV search, software update and
default setting.
**
Note: Press the BACK button to save the changes and return to the previous menu. Press the MENU
button to exit the menu screen.
10.1 Search Channels
Search Channels enables you to configure the installation settings.
1. Press the MENU button.
2. Select Installation using the
button, and press the OK
button.
3. To access installation menu, password is required. Enter the
password to proceed.
4. Select Search Channels using the
button and press the
OK
button.
**
Note: The default password is 0000.
1. Fixed Antenna
You can set the antenna and LNB information for channel search. If the antenna is not properly set, channel search
cannot be activated which means you cannot watch any of the programmes on air.
1. Select Antenna and press the OK button to view the list of
antennas.
2. Select a value for Antenna using the OK
or button.
3. Enter the value for Satellite, LNB Frequency, 22kHz Tone,
DiSEqC Input and LNB Voltage.
4. Select Save and press the OK
button to complete.
10. Installation
GB 55