Filter
Top Products
• Reset Position
You can restore the position saved at motor antenna to the default setting.
1. Select Reset Position using the
button and press the OK button.
2. Pop-up will appear. Select OK and press the OK
button to restore all values saved at motor antenna to
default setting.
3. Please wait during the motor antenna is restored.
Note: Reset may not be activated depending on the condition of the antenna. Repeat the procedure above if
necessary.
3. Transponder
1. Select Transponder in Search Channel using the button
and press the OK
button.
2. Select an option for Transponder using the OK
or
button.
3. To add another transponder, select User Define from the list.
4. Add Transponder screen will appear. Enter the values for
Frequency, Polarization, Symbol Rate, Transmission, FEC,
Modulation and Pilot.
5. Select Save and press the OK
button to complete.
**
Frequency
1. Select Frequency using the
button.
2. Enter the frequency using the NUMERIC(0-9) buttons.
**
Polarization
1. Select Polarization using the
button.
2. Select one option among Auto, Horizontal and Vertical using
the OK
or button.
**
**
10. Installation
GB 63