Filter
Top Products
16
17
D19
D20
H
H
D21
D22
Reinstall the motor by inserting the tabs and pushing up
into position. Make sure the wires are not pinched between
the motor and the housing.
Connect wiring from the motor to the wiring cover plate.
Secure the motor by tightening the 2 screws. Turn on the power source.
ON
OF
F
D23
D24
E1
Go to step
on page 17
to attach grille.
Test the motor. If the motor does not run, check the plug
connection.
K
L
M
E2
K
H
E3
K
J
E4
Slide light mount over posts. Attach thumbscrews.
WARNING: To reduce the risk of electrical shock,
all 4 thumbscrews MUST be properly installed.
Align dome and push up.
K
E5
L
Screw dome into position.
J
H
E1
Attaching the Grille
Remove the thumbscrews.
M
L
E6
41721-01 12/25/2004 41721-01 12/25/2004
Remove dome.