Filter
Top Products
55
CHANNEL SETUP
Memorizing the Channels
Your PDP can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the
available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to
change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast
source, memorizing the channels (automatic) and adding and deleting channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is
connected to the TV (i.e., an antenna or a cable system).
1
2
3
- STD, HRC and IRC identify various types of cable TV systems. contact your local cable company to identify
the of cable system that exists in your particular area.
- The PDP automatically cycles through all available channels and stores them in memory.
- If you press the MENU button in the middle of AUTO STORE, the first stored channel will be displayed, and
the AUTO STORE stops.
MENU
5
6
4
Press Menu button.
Menu items appear on the screen.
Press Up and Down buttons to move to
“CHANNEL” icon.
Press Left and Right buttons to select
“CHANNEL”.
AIR/CATV is highlighted.
Repeatedly press the Left/Right buttons to
cycle through these choices :
STD HRC IRC AIR
Press Up and Down buttons to move to
“AUTO PROGRAM”.
Press Left and Right buttons to select
“AUTO PROGRAM”.
AUTO PROGRAM menu appears.
Press Left and Right buttons to select
“YES”, then store the selected channels.
AUTO PROGRAM
YES
NO
MOVESELECT MENU
CHANNEL
AIR / CATV
AUTO PROGRAM
FINE TUNE
CHANNEL STORE
LNA
AIR
OFF
MOVESELECT MENU
CHANNEL
AIR / CATV
AUTO PROGRAM
FINE TUNE
CHANNEL STORE
LNA
AIR
OFF
MOVESELECT MENU