Filter
Top Products
Chapter 1. Introducing the xSeries 205 Type 8480 server 7
Server connectors
The following illustration shows the connectors on the rear of the server.
Rear View:
Power-cord connector: Connect the power cord to this connector.
Mouse connector: Connect a mouse or other PS/2
®
device to this connector.
Keyboard connector: Connect a PS/2 keyboard to this connector.
Parallel connector: Connect a parallel device to this connector.
Serial 1 connector: Connect a 9-pin serial device to this connector.
Serial 2 connector: Connect a 9-pin serial device to this connector
USB 1 connector: Connect a USB device to this connector.
USB 2 connector: Connect a USB device to this connector.
Ethernet connector: Use this connector to connect the server to a network.
Mic connector (pink): Connect a microphone to this connector.
Line out connector (green): Connect an audio output device, such as speakers, to
this connector.
Line in connector (blue): Connect an audio input device, such as a stereo, to this
connector.
Video connector: Connect a monitor to this connector.
If you have an optional Remote Supervisor Adapter (system-management adapter)
installed in PCI slot 1, your server has additional connectors and LEDs. See the
Option Installation Guide for more information about these connectors and LEDs.
Power cord
Mouse
Keyboard
Parallel
Serial 1
Serial 2
USB 2
USB 1
Mic (pink)
Line in (blue)
Line out (green)
Ethernet
Video
1
1
2
2