Filter
Top Products
/ᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍ/
/ᑍ If the call is successful, call the exit programs. ᑍ/
/ᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍ/
Call_Exit_Program(rcv_variable);
/ᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍ/
/ᑍ If the continuation handle field in the receiver variable is ᑍ/
/ᑍ not set to blanks, the API has more information to return ᑍ/
/ᑍ than what could fit in the receiver variable. ᑍ/
/ᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍ/
rcv_ptr=rcv_variable;
while (memcmp(((Qus_EXTI2_t ᑍ)rcv_ptr)->Continue_Handle,
" ",16)!=)
{
memcpy(continuation_hdl,
((Qus_EXTI2_t ᑍ)rcv_ptr)→Continue_Handle,16);
/ᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍ/
/ᑍ Call the API to retrieve the exit program information. ᑍ/
/ᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍ/
QusRetrieveExitInformation(continuation_hdl,
&rcv_variable,
len_rcv_variable,
"EXTI2",
"EXAMPLE_EXIT_POINT ",
"EXMP1",
exit_pgm_num,
&sel_criteria,
&error_code);
/ᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍ/
/ᑍ Verify that the call to the API is successful. ᑍ/
/ᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍ/
if (error_code.ec_fields.Bytes_Available != )
{
printf("RETRIEVE EXIT PROGRAMS FAILED WITH EXCEPTION: %.7s",
error_code.ec_fields.Exception_Id);
exit(1);
}
/ᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍ/
/ᑍ If the call is successful, call the exit programs. ᑍ/
/ᑍ The receiver variable offers enough room for a minimum of ᑍ/
/ᑍ one exit program entry because the receiver variable was ᑍ/
/ᑍ declared as 35 bytes. Therefore, this example only ᑍ/
/ᑍ checks the number of exit programs returned field. If the ᑍ/
/ᑍ receiver variable were not large enough to hold at least ᑍ/
/ᑍ one entry, the bytes available field would need to be ᑍ/
/ᑍ checked as well as the number of exit programs returned ᑍ/
/ᑍ field. If the number of exit programs returned field is ᑍ/
/ᑍ set to zero and the bytes available field is greater than ᑍ/
/ᑍ the bytes returned field, the API had at least one exit ᑍ/
/ᑍ program entry to return but was unable to because the ᑍ/
/ᑍ receiver variable was too small. ᑍ/
/ᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍᑍ/
Call_Exit_Program(rcv_variable);
} /ᑍ While continuation handle not set to blanks ᑍ/
} /ᑍ Number of exit programs not equal to zero ᑍ/
4-18 System API Programming V4R1