Filter
Top Products
7000 Bus Converter User Manual (version 1.2,Feb/2003, 7PH-006-10) --------------- 34
3.1.4 Verifying the Installation:
This section will guide you on how to verify if the I-7560 was properly
installed. You will also need to determine the COM port assignment made
by Windows for the USB to RS-232 converter.
Note: Before you plug in the I-7560 for the first time, make sure that you
do not attach any serial device first to the converter. You must only plug in
the I-7560 itself.
To verify if the device is properly installed and determine the COM port
assignment of the device:
1. Click Start _ __ _ Control Panel _ __ _ System. Inside System
Properties, click on Device Manager. Double-click on Ports (COM &
LPT1). You should see the I-7560 USB-to-RS232 (COM3) device listing.
This also means that Windows has assigned the device to COM3 port.