Filter
Top Products
7000 Bus Converter User Manual (version 1.2,Feb/2003, 7PH-006-10) --------------- 62
4. Inside the Advanced Settings, click on the COM Port Number and
check what other port numbers are unused. If it so happens that Windows
assigned a COM5 to the device, you may try to reassign it to a lower
unused port number. Click OK when finished. Try running HyperTerminal
to test if the new port number is OK.
Note: Some software programs may only support up to COM4 and may
not work if the port is assigned to COM5 or higher.
5. Once you have verified the device to be properly installed, you may
now proceed to using the USB-to-3 Ports RS485 Hub in connecting to
serial devices. Attached the serial device to the serial port of the adapter
and then plug in the USB connector to the USB port of your computer.
Use the supplied driver of the serial device if needed.