Insignia NS-13CTV TV DVD Combo User Manual


 
11
Insignia NS-13CTV TV/DVD Combo
www.insignia-products.com
General Setup menu Preference menu
This menu is available only when there is no disc
in the player. These settings are applied to all
discs that are played.
Playable discs
The following 8 cm and 12 cm discs can be
played in this DVD player:
The DVD player supports DVD, VCD, CD-R,
CD-RW, SVCD, DVCD, HDCD, JPEG, CD+G,
DIVX, Kodak CD, and WMA.
Value Description
TV Display This function applies only when the DVD
output is connected to an external television.
You can select from the following:
4:3/PS (Pan and Scan)—Select if you
have a normal aspect ratio (4:3)
television. In PS mode, widescreen
material fills the screen but at the
expense of chopping off the extreme
left and right edges of the original
picture. For this feature to work, the
disc must support Pan and Scan.
4:3/LB (Letter Box)—Select if you
have a normal aspect ratio (4:3)
television. Widescreen material is
shown in pure unaltered form,
allowing the entire picture area of the
original film to be viewed without any
side cropping. Black bars appear
above and below the picture.
16:9—Select if you have a
widescreen (16:9) television. Black
bars may still appear above and
below the picture even if using a
widescreen television. This is because
some film directors prefer to use ultra
widescreen aspect ratios such as
2.35:1. This is normally indicated on
the DVD packaging.
Angle Mark This function lets you select a particular
camera angle when playing a DVD which
offers multiple camera angle. You can set
this item to ON or OFF.
OSD LANG This function lets you select the on-screen
display language.
SPDIF Output This function sets the audio outputs. This
DVD player includes three types of audio
output:
SPDIF OFF—An analog surround
sound format is output through the
back-panel connections for 2-channel
audio out or 5.1-channel audio out.
SPDIF/RAW or SPDIF/PCM—This
surround sound format is output to a
Dolby Digital/DTS decoder through
the coaxial connector on the back
panel.
Caption This function allows you to display or hide
the DVD caption.
Screen Saver This function turns on an animated picture
anytime the DVD player is idle for more than
three minutes.
HDCD This function lets you select the type of
HDCD playback, 44.1K or 88.2K.
Last Memory This function allows you to continue play
from the last point you were watching before
you press STOP.
Value Description
Parental This function works in conjunction with the
various censorship classes assigned to
DVDs. These classes help to control the
types of DVDs that children watch. There are
up to eight classes for DVDs.
To change this setting, you must enter your
password. This initial password is 1234.
When Parental is set to OFF, any disc may be
played.
Password This function lets you change the password
by entering four digits. You must confirm the
four digits before the new password is
accepted.
If you forget your password, or a password
is accidentally set, enter 1369 as the
password.
Default This function resets all settings (except
password and parental lock status) for the
DVD player back to the manufacturer’s
original settings. Press ENTER to perform
the reset.
Disc Label Contents
DVD Video Audio and video
(moving picture)
Audio CD Audio
HDCD Audio
MP3 Audio
JPEG Video (picture)
Kodak CD
[
Video (picture)
CD-R Audio or video
(moving picture)
CD-RW Audio or video
(moving picture)
CD+G Audio (picture)
DIVX Audio + video
(moving picture)
Note
You cannot play discs other than those listed above.
You cannot play non-standardized discs, even if they have one
with one of the above labels.
The performance of CD-R or CD-RW discs depends on the
way the disc was recorded. In a few cases, their performance
may not be consistent or they may not play.