Insignia NS-19E310A13 CRT Television User Manual


 
28
NS-19E310A13 Insignia 19" LED TV
www.insigniaproducts.com
5 Press
S
or
T
to highlight an option, then press
ENTER to access the option. You can select:
Auto Adjust—Automatically adjusts the
image settings such as position and phase.
H. Position—Moves the image right or left.
V. Position—Moves the image up or down.
Clock—Minimize vertical stripes in the screen
image.
Phase—Adjusts the focus of stable images.
Reset Computer Settings—Resets all
computer settings to factory mode.
6 Press
W
or
X
to adjust the option, or press
S
or
T
to select a setting.
7 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Adjusting the sound
Adjusting sound settings
To adjust sound settings:
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight AUDIO, then press
T
or
ENTER. The Audio menu opens.
3 Press
S
or
T
to highlight an option, then press
ENTER to access the option. You can select:
Sound Mode—Selects the sound mode. You
can select:
Standard—Balances treble and bass. This
setting is good for watching standard TV
broadcasts.
Theater—Enhances treble and bass for a
rich sound experience. This setting is good
for watching DVDs, Blu-ray discs, and
HDTV.
Music—Preserves the original sound. This
setting is good for listening to music.
News—Enhances vocals for TV audio. This
setting is good for watching news
broadcasts.
Custom—Lets you manually adjust sound
settings.
Balance—Adjusts the balance between the
left and right audio channels.
Advanced Audio—Opens the
Audio - Advanced Audio menu where you can
adjust additional audio options.
Bass—Adjusts the low sounds.
Treble—Adjusts the high sounds.
TV Speakers—Selects where to play TV
audio. When you connect headphones to
your TV, audio plays through both the
headphones and the TV speakers. You can
select On (default setting) to play audio
through both the headphones and the TV
speakers, or select Off to turn off the TV
speakers and play audio only through the
headphones.
Digital Audio/SPDIF—Sends digital audio
to an external audio system. You can select
PCM (to output audio in 2-channel stereo),
or RAW (to pass through the original
digital audio sound).