Insignia NS-19E310A13 CRT Television User Manual


 
49
Insignia 19" LED TV
www.insigniaproducts.com
3 Press
S
or
T
to highlight INlink, then press
ENTER. The Settings-INlink menu opens.
4 Press
S
or
T
to highlight Connect, then press
ENTER. A HDMI CEC-compatible device in
standby mode turns on.
Opening an INlink-compatible device’s root
menu
You can open an INlink-compatible device’s root
menu, then use your TV’s remote control to control
the device.
To open an INlink-compatible device’s root
menu:
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The Settings menu opens.
3 Press
S
or
T
to highlight INlink, then press
ENTER. The Settings - INlink menu opens.
4 Press
S
or
T
to highlight Root Menu, then press
ENTER. The device’s root menu opens, and you
can use your TV’s remote control to control the
device.
Using a USB flash drive
You can connect a USB flash drive to your TV to
view compatible JPEG pictures.
Switching to USB mode
To switch to USB mode:
1 Make sure that you have connected the USB
flash drive to the USB port on your TV.
2 Press INPUT. The Input Source list opens.
3 Press
S
or
T
to highlight USB, then press
ENTER. The Photos menu opens.
Notes
Never remove the USB flash drive or turn off
your TV while viewing JPEG pictures.
The JPEG picture viewer only supports JPEG
format images (with “.jpg” file extensions) and
not all JPEG files are compatible with your TV.
Note
To exit USB mode, press INPUT to open the Input
Source list, then select another input source, or press
a Quick Launch Input button.