Insignia NS-32L450A11 Flat Panel Television User Manual


 
19
26"/32" LCD, 1080p
www.insigniaproducts.com
Connecting a USB device
To connect a USB device:
Plug a USB device, such as a flash drive, into the
USB port on the side of your TV.
To play from a USB device:
1 Turn on your TV, then press INPUT to open the
Input Source list.
2 Press or to select USB, then press
OK/ENTER.
Connecting headphones
The TV speakers are muted when headphones are
attached.
To connect headphones:
Connect headphones to the (headphone) jack
on the back of your TV.
Connecting a digital sound system
To connect a digital sound system:
1 Make sure that your TV’s power cord is
unplugged and the sound system is turned off.
2 Connect a digital optical audio cable to SPDIF
jack on the back of your TV and to the digital
optical audio jack on the digital sound system.
Caution
Never remove the USB device or turn off the TV while
using the USB device. You may lose data or damage
the USB device.
Note
For more information, see “Using USB” on page 40.
Side of TV
USB device
Warning
Loud noise can damage your hearing. When using
headphones, use the lowest volume setting on your
headphones that still lets you hear the sound.
Side of TV
Back of TV
Sound system