Filter
Top Products
15
NS-39D310NA15 Insignia 39" LED TV
www.insigniaproducts.com
Using component video (better)
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a component video cable (not provided) to the Y/VIDEO, P
B
, and P
R
jacks on the back of your TV and
the component video out jacks on the cable or satellite box.
4 Connect a RCA audio cable (not provided) to the AUDIO L and R jacks on the back of your TV and to the audio
out jacks on the cable or satellite TV box.
5 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
6 Press INPUT to open the INPUT SOURCE list.
7 Press
S
or
T
to highlight Component/AV, then press ENTER.
Note
Cables are often color-coded to match color-coded jacks.
Notes
•The Y/VIDEO, P
B
, and P
R
video jacks (used to connect a component
device) share the AUDIO L and R jacks with the Y/VIDEO jack (used to
connect a composite device).
• When you connect the audio using the AUDIO L and R jacks, the audio
output is analog.
RCA audio cable
Cable or
satellite box
Component video cable
Back of TV
Component
video cable
connectors
Analog
audio cable
connectors
Analog
audio jacks
Component
video jacks
On your TV