Filter
Top Products
81
NS-40D510NA15 Insignia 40" LED TV
www.insigniaproducts.com
Specifications
Specifications are subject to change without notice.
Dimensions and weight
Screen
Display resolutions
Tuner
Inputs
Outputs
Audio
Power
Miscellaneous
Without stand
35.6 × 20.6 × 3 in. (90.4 × 52.4 × 7.7 cm)
15.2 lbs. (6.9 kg)
With stand
35.6 × 21.3 × 8.5 in. (90.4 × 54 × 21.5 cm)
15.9 lbs. (7.2 kg)
Screen size measured
diagonally
39.5 in.
Display type LED
Screen refresh rate 60Hz
Display resolution 1080p
Panel resolution 1920 (H) × 1080 (V)
Aspect ratio 16:9
Contrast ratio
(typical)–panel
3,000:1
Dynamic contrast ratio–
list value
1,000,000:1
TV Brightness (minimum)
cd/m
2
180 nits
Comb filter 3d y/c digital
Response time 8 ms
Horizontal viewing angle 176°
Vertical viewing angle 176°
HDMI suggested resolutions 1080p, 1080i, 720p, 480p, 480i
Component video suggested
resolutions
1080i, 720p, 480p, 480i
Analog NTSC
Digital ATSC, 8-VSB, Clear-QAM
HDMI
2 (side)
E-EDID compliant/HDCP compliant
MHL-enabled and Roku Ready® (HDMI 2/MHL jack)
Component video 1 (back)
Composite video
1 (back)
Shared with component Y
Shared audio (component
and composite)
Ye s
PC/VGA 1 (back)
3.5mm PC/DVI audio input 1 (back)
DVI
1 (side)
HDMI 1/ARC/DVI jack
USB
1 (side)
Supports JPEG and firmware upgrade
Antenna/Cable 1 (back)
Video No
Analog audio/Headphone 1 (back)
Digital audio 1 (optical) (back)
WiFi No
Ethernet No
DTS Tuning Package DTS Sound
Speakers
Number: 2
Watts per channel: 5W
Power consumption
On: 70W
Standby: <1W
Power input AC 120 V, 60Hz
OSD languages English, French, Spanish
INlink Yes
MHL-enabled and
Roku Ready®
Yes (HDMI 2/MHL jack)
Game Mode Yes
ENERGY STAR qualified Yes
Internet connectable No
TV base screws M4 type (20 mm length) (4 pcs)
V-Chip (version 2.0) Yes
Sleep timer Yes
Channel labeling Yes
VESA mount (mm)
(horizontal × vertical)
200 × 200
VESA mount screws M4 type
Note
The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came
with the wall-mount bracket for screw
lengths.