Insignia NS-46E481A13 TV Antenna User Manual


 
11
Insignia 39"/42"/46" 1080p LED TV
www.insigniaproducts.com
Using DVI (same as HDMI but requires a sound
connection)
To connect a cable or satellite box using DVI:
1 Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect an HDMI-DVI adapter (not provided) to
one end of an HDMI cable (not provided), then
connect the adapter to the DVI OUT jack on the
cable or satellite box.
4 Connect the other end of the cable to the
HDMI3/DVI jack on the side of your TV.
5 Connect a 3.5mm audio cable (not provided) to
the PC IN PC/DVI AUDIO IN jack on the side of
your TV and to the AUDIO OUT jacks on the
cable or satellite box.
6 Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
7 Go through the Setup Wizard on page 21
.
Using component video (better)
To connect a cable or satellite box using
component video:
1 Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect a component video cable (not
provided) to the COMPONENT IN Y, P
B, and PR
video jacks on the back of your TV and the
component video out jacks on the cable or
satellite box.
4 Connect an audio cable (not provided) to the
COMPONENT IN L/R audio jacks on the back of
your TV and to the audio out jacks on the cable
or satellite TV box.
5 Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
6 Go through the Setup Wizard on page 21
.
Notes
•You must use the HDMI3/DVI jack to connect a
cable or satellite box using DVI. If you use
another HDMI jack, you will not hear sound
from the TV speakers.
The back of your TV may vary from the
illustration based on the model of your TV.
Note
When you connect the audio using the
PC IN PC/DVI AUDIO IN jack, the audio output is
analog.
Cable or satellite box
HDMI cable with
HDMI-DVI adapter
3.5mm audio cable
Side of TV
Note
The back of your TV may vary from the illustration
based on the model of your TV.
Note
When you connect the audio using the
COMPONENT IN L/R audio jacks, the audio output is
analog.
Audio cable
Cable or satellite box
Cables are often color-coded
to match color-coded jacks.
Component video
cable
Back of TV