Filter
Top Products
14
NS-39E480A13/NS-42E480A13/NS-46E481A13 Insignia 39"/42"/46" 1080p LED TV
www.insigniaproducts.com
Connecting a DVD or Blu-ray player
Using HDMI (best)
To connect a DVD or Blu-ray player using HDMI:
1 Make sure that your TV’s power cord is
unplugged and the DVD or Blu-ray player is
turned off.
2 Connect an HDMI cable (not provided) to one of
the HDMI jacks on the back or side of your TV
and to the HDMI OUT jack on the DVD or
Blu-ray player.
3 Plug your TV’s power cord into a power outlet,
then turn on your TV.
4 Turn on the DVD or Blu-ray player, then set it to
the correct output mode. For more information,
see the documentation that came with the
player.
5 Press INPUT to open the Input source list.
6 Press
S or T to highlight HDMI 1, HDMI 2, or
HDMI 3, then press ENTER.
Using DVI (same as HDMI but requires a sound
connection)
To connect a DVD or Blu-ray player using DVI:
1 Make sure that your TV’s power cord is
unplugged and the DVD or Blu-ray player is
turned off.
2 Connect an HDMI-DVI adapter (not provided) to
one end of an HDMI cable (not provided), then
connect the adapter to the DVI OUT jack on the
DVD or Blu-ray player.
3 Connect the other end of the cable to the
HDMI3/DVI jack on the side of your TV.
4 Connect a 3.5mm audio cable (not provided) to
the PC IN PC/DVI AUDIO IN jack on the side of
your TV and to the AUDIO OUT jacks on the
DVD or Blu-ray player.
5 Plug your TV’s power cord into a power outlet,
then turn on your TV.
6 Turn on the DVD or Blu-ray player, then set it to
the correct output mode. For more information,
see the documentation that came with the
player.
7 Press INPUT to open the Input source list.
8 Press
S or T to select HDMI 3, then press
ENTER.
Note
The back of your TV may vary from the illustration
based on the model of your TV.
Note
You can also press HDMI repeatedly to select the
DVD or Blu-ray player.
DVD or Blu-ray player
HDMI cable
Back of TV
Notes
•You must use the HDMI3/DVI jack to connect a
DVD or Blu-ray player using DVI. If you use
another HDMI jack, you will not hear sound
from the TV speakers.
• The back of your TV may vary from the
illustration based on the model of your TV.
Note
You can also press HDMI one or more times to select
the DVD or Blu-ray player.
DVD or Blu-ray player
HDMI cable with
HDMI-DVI adapter
3.5mm audio cable
Side of TV