Filter
Top Products
27
Insignia 42"/46"/55" LCD HDTV, 1080p
www.insigniaproducts.com
3 Press MENU. The on-screen menu opens.
4 Press
W or X to highlight SETTINGS, then press
T or ENTER. The SETTINGS menu opens.
5 Press
S or T to highlight Component Settings,
then press ENTER.
6 Press
S or T to highlight an option, then press
ENTER to access the option. You can select:
• Phase—Minimizes horizontal distortion.
• Reset Component Settings—Resets all
component video settings to factory mode.
7 Press
W or X to adjust the option, or press S or
T to select a setting.
8 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Adjusting the sound
Adjusting sound settings
To adjust sound settings:
1 Press MENU. The on-screen menu opens.
2 Press
W or X to highlight AUDIO, then press T or
ENTER. The AUDIO menu opens.
3 Press
S or T to highlight an option, then press
ENTER to access the option. You can select:
• SRS TruSurround HD—Creates an
impressive, feature-rich surround sound
experience from two speakers, complete with
rich bass, high frequency detail and clear
dialog.
• Treble—Adjusts the high sounds.
• Bass—Adjusts the low sounds.
• Balance—Adjusts the balance between the
left and right audio channels.
• Auto Volume—Automatically adjusts the
volume so it is consistent across programs and
channels.
• Digital Audio/SPDIF—Sends digital audio to
an external audio system. You can select PCM
(to select to output audio in 2-channel stereo),
or RAW (to pass through the original digital
audio sound).
OK
ENTER
MENU
EXIT
Picture
Mode
Brightness
Contrast
Color
Tint
Sharpness
Energy Savings
48
50
60
0
+10
MOVE
EXIT
PREVIOUS
SELECT
Adjust settings to affect picture quality
Picture Channels Settings USBAudio
OK
ENTER
MENU
EXIT
Auto Input Sensing
Input Labels
INlink
Computer Settings
Component Settings
System Info
On
Allow the TV to automatically control CEC devices connected to the TV via HDMI
MOVE
EXIT
PREVIOUS
SELECT
Settings
Picture Channels Settings USBAudio
Note
You can quickly adjust SRS TruSurround HD, Bass,
Treble, or Balance or Reset Audio Settings by using
the AUDIO and
W or X buttons on the remote
control. Press AUDIO repeatedly to toggle between
the SRS TruSurround HD, Bass, Treble, Balance,
and Reset Audio Settings screens, then press
W or X
to adjust the option.
OK
ENTER
MENU
EXIT
Picture
Mode
Brightness
Contrast
Color
Tint
Sharpness
Energy Savings
48
50
60
0
+10
MOVE
EXIT
PREVIOUS
SELECT
Adjust settings to affect picture quality
Picture Channels Settings USBAudio
OK
ENTER
MENU
EXIT
Audio
SRS TruSurround HD
Treble
Bass
Balance
Auto Volume
Digital Audio/SPDIF
On
32
32
0
Off
PCM
MOVE
EXIT
PREVIOUS
SELECT
Adjust settings to affect sound quality
Picture Channels Settings USBAudio