Insignia NS-BRDVD3 DVD Player User Manual


 
4
NS-BRDVD3 Blu-Ray Disc Player
www.insigniaproducts.com
Setting up your player
Installing remote control batteries
To install remote control batteries:
1 Remove the battery compartment cover.
2 Insert two AAA batteries into the battery
compartment. Make sure that the + and –
symbols on the batteries match the + and –
symbols in the battery compartment.
3 Replace the battery compartment cover.
Connecting a TV using an HDMI cable (best)
To connect a TV using an HDMI cable:
Connect an HDMI cable to the HDMI jack on
the back of your player and to the HDMI IN
jack on the TV.
Notes
Make sure that you insert the batteries correctly.
Do not heat, open, or short-circuit batteries.
Do not throw batteries into a fire.
Do not mix different types of batteries or mix
old and new batteries.
Do not try to recharge non-rechargable
batteries.
If the remote control does not function correctly
or if the operating range becomes reduced,
replace the batteries.
Notes
Only the HDMI is capable of 1080i/1080p video
output and the highest definition audio codes.
An HDMI cable carries both video and audio. If
you want to use TV speakers, you do not need to
make an audio connection. If you want to use an
audio receiver, connect an HDMI cable between
your player and the HDMI input jack on the
receiver. Then connect a second HDMI cable
between the HDMI output jack on the receiver
and the HDMI input jack on the TV.
TV
Back of player