Filter
Top Products
10
NS-D150A13 Insignia DVD Player
www.insigniaproducts.com
Connection power
To connect power:
• Plug the AC power cord into a power outlet.
Using component video (best)
To connect your DVD player using component
video:
1 Make sure that the power cords for your DVD
player and the TV are unplugged.
2 Connect a component video cable (not
included) to the COMPONENT VIDEO OUT
jacks on the back of your DVD player and to the
component video in jacks on the back of the TV.
3 Connect an analog audio cable to the AUDIO
OUT jacks on the back of your DVD player and
to the audio in jacks on the TV.
4 Plug in the power cords, then turn on the TV and
your DVD player.
5 Select the video input source on the TV that you
connected your DVD player to. For more
information, see the documentation that came
with the TV.
Cautions
• Your DVD player should only be operated from
the power source indicated on the label.
• Always unplug the AC power cord from the
power outlet when you will not be using your
DVD player for an extended period of time.
Note
The COMPONENT VIDEOOUT jacks share the
AUDIO OUT jacks with the VIDEOOUT jack.
Analog audio cable
Cable connectors are often
color-coded to match
color-coded jacks.
Component video cable
Back of player