Filter
Top Products
7
Insignia NS-LCD22-09 22" W LCDTV 720P
www.insignia-products.com
Connecting to an external signal source
You can connect a DVD, VCD, VCR, or STB
using a variety of methods, including composite
cables, component cables, an S-Video cable, or
an HDMI cable. The S-Video cable does not
carry sound. If you use an S-Video cable, you
need to use audio cables to connect the audio
output.
To connect an external signal source:
1 For composite video—Plug the audio/video
cable into the AUDIO L and AUDIO R (6)
jacks and VIDEO (2) jack on the back of your
TV, then connect the other ends to the
corresponding jacks on the external signal
source.
Or
For S-Video—Plug in the audio cables as
described above, then plug one end of an
S-Video cable into the S-Video (3) jack on
the back of your TV, then plug the other end
into the S-Video jack on the external signal
source.
Or
For component video—Plug the Y, Pb, and
Pr video cables (5) into the COMPONENT
jacks and the Audio L and Audio R cables (4)
into the COMPONENT AUDIO jacks on the
back of your TV, then plug the other ends of
the cables into the corresponding jacks on
the external signal source.
Or
For HDMI—Plug one end of an HDMI cable
into the HDMI jack on the back of your TV,
then plug the other end into an HDMI device.
2 Turn on your TV.
3 Press INPUT repeatedly to select the
external signal source you want to watch.
4 Turn on external signal source.
5 Insert a disc or videotape into the external
signal source, then press PLAY.
Warning
Make sure that you turn off and unplug your TV
before connecting devices.
Note
For better video, use the S-Video jack if your
device has an S-Video connection. For best video,
use the HDMI jack if your device has an HDMI
connection.
VGA AUDIO
SPDIF
2
3
1
4
5
6