Filter
Top Products
28
Connecting
—Continued
Notes:
• Before making any connections, turn off the DPS-10.5
and your TV and disconnect their power cords from
the wall outlets.
• Also refer to the hookup pages in your TV’s manual.
• Connect the DPS-10.5’s video outputs directly to your
TV. Don’t connect a VCR or other video equipment in
between. Doing so may result in picture distortion,
because of the copy protection system used on
DVD-Video discs.
• See the tables on page 24 for details on how the
DPS-10.5 outputs video and audio from each output.
This section shows how to connect the DPS-10.5 to an
HDTV (plasma, LCD) or projector.
Use a commercially available component video cable
(BNC) to connect the DPS-10.5’s HD VIDEO OUT
COMPONENT socket to a component video input on
your HDTV. Use the supplied AV cable (RCA) to con-
nect the DPS-10.5’s D.MIX AUDIO OUT to an analog
audio input on your HDTV.
Notes:
• The yellow plugs on the supplied AV RCA cable are
not used in this example.
• Don’t connect a standard TV to the HD VIDEO OUT
COMPONENT socket, because you’ll get no picture.
• See the tables on page 24 for details on how the
DPS-10.5 outputs video and audio from each output.
This section shows how to connect the DPS-10.5 to a AV
receiver, HDTV, or projector that has an HDMI input
socket.
What is HDMI?
HDMI (High Definition Multimedia Interface) is a new
connection format that can carry uncompressed, stan-
dard or high definition digital video and up to eight chan-
nels of digital audio. Until now, several separate video
and audio cables have been required to connect AV com-
ponents together. With HDMI, a single cable is all that’s
necessary to achieve the best picture and audio quality.
HDMI video is compatible with DVI (Digital Visual
Interface). To send HDMI video to a DVI input requires
an HDMI-to-DVI cable. The DPS-10.5 supports HDCP
(High-bandwidth Digital Content Protection), and for an
HDMI-to-DVI connection to work, the other component
must also support it. Note that this may not work with
some DVI components.
1
Turn off the DPS-10.5 and your TV, and dis-
connect their power cords from the wall
outlets.
2
Connect the DPS-10.5 to your TV as
shown.
3
When you’ve completed all connections,
see “Turning On the DPS-10.5” on
page 38.
D. Connecting an HDTV or Projector
E. Connecting a Component with an
HDMI Input
YPB PR
YPB PR
COMPONENT
COMPONENT IN
D. MIX
L
R
AUDIO
OUT
LR
ANALOG INPUT
HDTV, projector
Component
video cable
(BNC)
(white)
(red)
Signal flow
(white)
(red)
AV RCA cable
(supplied)