Filter
Top Products
45
Setting the Audio 2 Options
■ Audio Out
If you connected this player to your amplifier using the 5.1
channel analog outputs (front, surround, center and subwoofer
outs), set this to [5.1 Channel]; if you connected only the
stereo outs, set to [2 Channel].
■ Speaker Setting
You only need to make this setting if you connected this player
to your amplifier using the 5.1 channel analog outputs.
Setting the size and position
Follow the on-screen displays to describe which speakers are
in your system and their sizes and positions.
Set the size of your speakers in the Size screen. The front left/
right (L/R) speakers have a fixed setting of [Large]. The center
(C), left surround (LS) and right surround (RS) speakers can
each be set to [Large], [Small] or [Off]. Set a speaker to
[Large] if the main speaker cone is 12cm or more; set to
[Small] if the it’s less than 12cm. Note that the LS and RS
speakers cannot be set independently.
The subwoofer (SW) can only be set to [On] or [Off].
Setting the distance
Set the distance from your main listening position to each
speaker in the [Distance] screen. The distance setting for any
speaker that was set to [Off] in the [Size] screen will be grayed
out. For the other speakers, enter the distance to the nearest
0.1m (10cm). You can set the distance for the L/R speakers
between 0.3m and 9m. Note that you must set the C and SW
speakers within 2m of the L/R setting. The LS and RS
speakers must be set within –6m and +2m of the L/R setting.
The graphic on the right of the screen represents your speaker
setup, with the currently selected speaker’s name highlighted
in blue, and the speakers set to [On] highlighted in yellow.
Settings: 2 Channel (Factory setting)
5.1 Channel
Note
• Even if you set [Audio Out] to [5.1 Channel], you’ll only get sound
from all speakers when playing a multi-channel DVD-Audio disc,
or Dolby Digital, DTS or MPEG encoded DVD disc.
• If you set to 2 Channel, Dolby Digital, DTS and MPEG audio is
mixed down to two channels so you still hear all the audio
recorded on the disc.
• Some DVD-Audio discs don’t allow down-mixing of audio. These
discs always output multi-channel audio regardless of the setting
made here.
—
Audio2
Video1
Language
General
A1
V2
Exit
Move
Audio Out
Speaker Setting
2 Channel
5.1 Channel
Setting up audio output
SETUP
—
Audio2
Video1
Language
General
A1
V2
Exit
Move
Audio Out
Speaker Setting
2 Channel
Start
Setting the speaker
system configuration
SETUP
Select
ENTER
Exit
Select
Distance
Return
Audio2
Video1
Language
General
A1
V2
Speaker Setting
L/R
C
LS
RS
SW
Size
— Large
— Large
— Large
— Large
— On
LCR
SW
LS RS
SETUPENTER
RETURN
Factory Settings: Center: Large
Subwoofer: On
Surround: Large
Distance: All 3.0m