Filter
Top Products
11
Controlling Devices Requiring Separate Power On and Off
Buttons, cont.
To turn the TV off, press and release the ON-OFF button to transmit
the Power Off button command. This method can be applied
similarly to any device and is available for all Modes. Note this
feature is not supported by all codes.
VCR/DVD/DVR Punch-Through Feature
This remote allows the 6 VCR transport buttons (i.e. PLAY, PAUSE,
STOP, FF, REWIND, and REC) to Punch-Through control from any
Mode programmed with TV, SAT or Cable codes to the last VCR,
DVD or DVR programmed Mode you used. Normally other types
of remotes only punch-through (from another Mode) on the 6 VCR
buttons to the device programmed under the VCR Mode button.
This is not much use if you are using a DVD programmed under a
Mode other than VCR. For example, if you have 3 DVD, VCR or DVR
devices programmed into this remote, the last one you accessed
on the remote will be the one that has control of the 6 VCR
transport buttons when in any other Mode. This feature will not
operate if the programmed TV, SAT or Cable code has its own VCR
transport button control e.g. a TV Combo, SAT/PVR, etc.
Volume/Mute Control and Punch-Through Feature
This remote lets you select which device Mode controls your
Volume/Mute buttons. The remote is initially set (factory default)
for all device Modes programmed with “Visual” codes (e.g. TV, VCR,
DVD, DVR, SAT & CABLE) and “Audio” codes (e.g. CD & AUDIO) to
use their own Volume/Mute control if present. If the programmed
“Visual” code has no Volume/Mute operation of its own then those
buttons will punch-through control to the TV Mode device without
needing to change to TV Mode. Please refer to the next page for
more information.
Setup, cont.