Filter
Top Products
Any Mode chosen for Volume/Mute control MUST have its own
Volume/Mute function or the Volume/Mute buttons will do
nothing.
Setting ALL Volume/Mute Control to any one Mode
This routine can set all Modes to “punch-through” to any one
chosen Mode for Volume/Mute button control without the needing
to change to that Mode.
1. Press and hold the SETUP button until the red indicator turns
on, then release the button.
2. Press and hold the MUTE button until the red indicator blinks
off, then release the button.
3. Press and release the desired Mode button (TV, DVD, etc.) for
Volume/Mute control, the red indicator blinks then stays on.
4. Press and release the MUTE button and the red indicator turns
off. The red indicator will blink rapidly for three seconds if the
Mode you have selected has no Volume/Mute control.
5. All other Modes will now punch-through to your chosen Mode
for Volume/Mute control.
6. All “Visual” and “Audio” programmed Modes will now punch-
through to the respective Modes you have chosen for Volume/
Mute control.
Setting any Mode to use its own Volume/Mute Control
This routine can set any Mode to use only its own Volume/Mute
control. Note - If your chosen Mode has no Volume/Mute functions
of its own then the Volume/Mute buttons will do nothing.
1. Press and hold the SETUP button until the red indicator turns
on, then release the button.
2. Press and hold the MUTE button until the red indicator blinks
off, then release the button.
3. Press and release the desired Mode button (TV, DVD, etc.), the
red indicator blinks then stays on.
4. Press and release the VOLUME- (Down) button, the red
indicator blinks then stays on.
5. Press and release the MUTE button and the red indicator turns
off.
6. All “Visual” and “Audio” programmed Modes will now punch-
through to the respective Modes you have chosen for Volume/
Mute control.
Setup, cont.