Filter
Top Products
7
Direct Code Entry
1. Press and hold the SETUP button until the red indicator stays
on, then release the SETUP button.
2. Press and release the desired mode button (TV, DVD, etc.). The
red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables (on separate sheet).
Note: after a valid code entry, the red indicator turns off. For
an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device
responds, no further programming is required. Note: If some
buttons do not operate your equipment, try one of the other
codes for your brand.
Write your codes down here for easy reference later.
Device Device stored Code
TV TV
DVD
CBL/SAT
DVR/AUX