Filter
Top Products
Masterpage:Right-No-Heading
EN 39
Filename [XV38ASAG_06DVD.fm]
Page 39 8 January 2005 2:54 pm
Sound Effect (3D PHONIC)
Using the Sound Effect function (3D PHONIC), you can change
the sound field.
● This function works only for analog audio output.
1 Access the selection menu.
Press SOUND EFFECT during playback.
● The current setting appears on the TV screen.
2 Select the Sound Effect (3D PHONIC) mode.
Press SOUND EFFECT repeatedly to select the desired
mode.
● Each time you press SOUND EFFECT, the Sound Effect (3D
PHONIC) mode changes as follows:
OFF]ACTION]DRAMA]THEATER](Back to the
beginning)
● The selection menu disappears if no operation is done for
about several seconds.
NOTES:
● The Sound Effect (3D PHONIC) function works correctly only
when playing back a DVD VIDEO disc recorded in the Dolby
Digital format. With other sources, you cannot get any effect if
you activate this function.
● When playing back a DVD VIDEO disc recorded with Dolby
Digital that does not contain the rear signal, you cannot get a
correct effect even if you activate the Sound Effect (3D
PHONIC) function.
VFP function
— Adjusting the picture quality
The VFP (Video Fine Processor) function enables you to adjust
the picture character according to the type of programing,
picture tone or personal preference.
1 Access the VFP setting menu.
2 Select the VFP mode.
Press we repeatedly.
● Each time you press we, the VFP mode changes as follows:
NORMAL]CINEMA]USER 1]USER 2](Back to the
beginning)
To adjust picture appearance manually
3 Access USER menu.
Press we repeatedly to select “USER 1” or “USER 2.”
4 Select the parameter.
Press rt repeatedly to select a parameter you want to
adjust, then press ENTER.
● Adjust gradually and confirm picture appearance results are as
preferred.
● VFP menu disappears and the following pop-up window
appears on the TV screen.
5 Adjust the parameter.
Press rt repeatedly to change the setting, then press
ENTER.
● The current VFP settings appear again.
Repeat steps 4 and 5 to adjust other parameters.
To return to the normal screen
Press DVD PICTURE.
NOTE:
The VFP setting screen disappears if no operation is done for
more than about 10 seconds.
OFF: No effect
ACTION: Suitable for action movies and sports
programmes in which sounds dynamically
move.
DRAMA: Provides natural and warm sound. You can
enjoy movies in a relaxed mood.
THEATER: You can enjoy sound effects like in a major
theater.
Press DVD PICTURE during
playback.
● The current setting appears on
the TV screen.
0
NORMAL
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
0
0
0
0
+
3
NORMAL: Select this normally.
CINEMA: Suitable for movie.
USER 1/
USER 2:
You can adjust parameters that affect picture
appearance and store settings. Go to step 3.
GAMMA
(–3 to +3):
Adjust this if the neutral color is bright or dark.
The brightness of dark and bright portions is
maintained.
BRIGHTNESS
(–8 to +8):
Adjust this if the picture is bright or dark on
the whole.
CONTRAST
(–7 to +7):
Adjust this if the objects in far and near
positions look unnatural.
SATURATION
(–7 to +7):
Adjust this if the picture is whitish or blackish.
TINT
(–7 to +7):
Adjust this if the appearance of flesh tone is
unnatural.
SHARPNESS
(–8 to +8):
Adjust this if the picture is indistinct.
0
GAMMA
0
GAMMA
XV38ASAG_06DVD.fm Page 39 Saturday, January 8, 2005 2:54 PM