JVC 1005TNH-II-IM Flat Panel Television User Manual


 
24
Quick Setup Connections
This TV can be used as a computer screen. Use a commercially available D-SUB cable to
connect the TV's PC INPUT terminal to the computer's analog RGB output terminal. If you
want to listen to the sound from the computer, use a commercially available RCA cable to
connect the INPUT-3 audio input terminal to the computer's audio output terminal.
Connecting to the computer
TV Rear Panel
INPUT 3
Y
Pr
Pb
VIDE
O
R
-
A
U
D
I
O
-
L
PC
IN
(D
-
SU
B
)
S-VID
EO
Notes:
Refer to your computer manual for a detailed explanation of the connections concerning your
computer.
Make sure that the connectors are facing the correct way when connecting.
After connecting, tighten the two screws to fix the connectors in place.
Looking at the images from a computer
After starting the computer, press the INPUT button to choose INPUT-3. You can listen to the
sound when the sound from the computer is connected to the INPUT-3 AUDIO input terminal.
Notes:
When the sound from the computer is connected to INPUT-3 by choosing external input
INPUT-3, the sound from the computer can be listened to, but the images from the computer
cannot be seen.
LCT1976 A.indd 24LCT1976 A.indd 24 10/6/05 1:47:51 PM10/6/05 1:47:51 PM