Filter
Top Products
18
The following pages gives you a brief description of each button’s function.
This remote can also control up to four other devices. See pages 51 - 52.
Remote Control
TIMER
Allows you to set the TV to turn on and set the TV to turn off
automatically after a set amount of time and channel of your choice.
On Timer / Input / Sleep Timer
Notes:
• If you set the interval of On Timer by pressing the
¥
buttons,
select channel at Input and press OK.
• After you set On Timer and turn off the TV, power lamp lights.
• You can check the remaining time of On Timer by displaying
this menu again.
• You can set the interval of Sleep Timer by pressing the
¥
buttons.
• 60 seconds before the TV turns off, a message will appear and it
will count the remaining time.
• See page 50, “On Timer using iPod”.
POWER
Turns the TV on or off.
MODE
TV STB VCR DVD AUDIO
Switch between “TV / STB / VCR / DVD / AUDIO devices.
See page 51.
V1 V2 V3 V4 V5
Switch between devices connected to Video-1, 2, 3, 4 and 5. For
V4 (Video-4) and V5 (Video-5) you must select the signal input type
fi rst (ie. composite, S-Video, or component). To do so, you need
to press the V4 or V5 button until the correct type is highlighted.
Select “Composite 1” for composite video signal input, “S-Video”
for S-video signal input, or “Component 1” for component video
signal input. Select “Composite 2” for composite video signal input
or “Component 2” for component video signal input. Select PC for
PC signal input.
123
456
789
0
TUNE
TV
RETURN
+
Change channels. Input remote codes. See page 51.
TUNE
Lets you decide the input channel and select it. After pressing the
remote 0 - 9 buttons, press TUNE.
0 h 0 m
0 - 0
0 min
Timer
On Timer
Input
Sleep Timer
LCT2518-001A-A.indd 18LCT2518-001A-A.indd 18 1/14/09 8:54:58 AM1/14/09 8:54:58 AM