Filter
Top Products
51
You can program your remote control to operate your external devices, using the instructions
and codes on pages 51 - 57.
How to set the codes
1) Manually turn on the device.
2) Change the remote control mode according to the device by pressing the MODE button.
Refer to the following list for which mode to use.
3) Find the remote control code for your device. See pages 53 - 57.
4) Set the remote code.
TUNE
Enter the four digit numberPress and hold
The mode indicator goes
out for a second, then it
lights.
5) Point the remote at the device and press power. If your device did not turn off or respond, try
another code.
Notes:
• If your device doesn’t respond to any of the codes listed or is not listed, see page 52.
• Some codes may have only limited functions. Try other codes that may have more functions.
123
456
789
0
TUNE
TV
RETURN
+
Programming Your Remote
TV
STB
VCR
DVD
AUDIO
JVC brand only
Cable Set Top Boxes, Cable/PVR Combinations, Satellite Set Top Box
DBS/PVR Combination
VCR, DBS/PVR Combination, PVR, DVD/PVR Combination
DVD Player, DVD Recorder, Home Theater in a Box, Receiver
Amplifier, Home Theater in a Box, Receiver
Device Applied for these devices
Advanced
LCT2518-001A-A.indd 51LCT2518-001A-A.indd 51 1/14/09 8:55:26 AM1/14/09 8:55:26 AM