Filter
Top Products
8
MENU SETTINGS
Storing menu settings in memory of this unit
1Press the [ENTER/MENU] button to engage the Menu
Display mode.
2
Select Profile Save with the [
ᮢ
] or [
ᮡ
] button.
3
Select the memory number where you want to store
the menu settings with the [+] or [–] button (one of
MEMORY 1 to 4).
●The “?” is added to the end of the selected memory number.
4
Press the [ENTER/MENU] button.
●The check screen is shown for confirmation.
5
Press the [ENTER/MENU] button again to confirm the
setting.
●The menu settings are stored in the selected memory. Once
the settings have been stored, the completion screen is
shown.
Memorandum:
●When the check screen is shown, press the [ESC] button to
cancel it. The previous Profile Save menu setting display is
restored.
6
Press the [ENTER/MENU] button or [ESC] button.
●Menu setting display is restored.
7
Press the [ESC] button to restore the normal display.
Note:
●Settings for Remote ID, Remote Speed and Remote Port are
not stored in memory for each Profile. One value is used for
all profiles.
Profi le
ME
S
M
a
O
v
R
e
Y2?
Profi le
MEMORY2
S
S
a
a
v
v
e
eOK?
Profi le Sav
S
e
aved.
BC–D2300
[ D1 |1080| 4:3]
Menu display
Completion screen
ENTER/MENU or ESC
Profile Save
ENTER/MENU
ESC
ENTER/MENU
ENTER/MENU
ESC
Check screen
1
Press the [ENTER/MENU] button to engage the Menu
Display mode.
2
Select Profile Load with the [
ᮢ
] or [
ᮡ
] button.
3
Select the memory to be recalled (MEMORY 1 to 4,
DEFAULT) with the [+] or [–] button.
When DEFAULT is selected, the factory setting is
recalled.
4
Press the [ENTER/MENU] button.
●Display the check screen for confirmation.
5
Press the [ENTER/MENU] button again to confirm.
●The selected settings are recalled. When completed, the
completion display is shown.
Memorandum:
●When the check screen is shown, press the [ESC] button to
cancel it. The previous Profile Load menu setting display is
restored.
6
Press the [ENTER/MENU] button or [ESC] button.
●Menu setting display is restored and the recalled menu
settings are activated.
7
Press the [ESC] button to restore the normal display.
Memorandum:
●The factory default settings are stored in MEMORY 1 to 4.
Recalling stored menu settings or factory default settings
Profi le
ME
L
M
o
O
a
R
d
Y2?
Profi le
MEMORY2
L
L
o
o
a
a
d
dOK?
Profi le Lo
L
a
o
d
aded.
BC–D2300
[ D1 |1080| 4:3]
Menu display
Completion screen
ENTER/MENU or ESC
Profile Load
ENTER/MENU ESC
ENTER/MENU
ENTER/MENU
ESC
Check screen
Normal display
Normal display
9
Enter characters to set the model name and the [License key].
Entering characters
POWER
LOCAL REMOTE
STATUS INPUT SYNC
MENU
ENTER ESC
BC-D2300U HDTV UP CONVERTER
Name
[CB-2D 300 ]
Name EDI
T
[CB-2D 300 ]
An example of model name setting is shown below.
1
Select [Name] in the sub menu for administration.
●The currently-set device name is shown.
2
Press the [ENTER/MENU] button.
●The Edit mode is engaged and the cursor appears.
3
Move the cursor with the [+] or [–] button.
Change the characters with [
ᮢ
] or [
ᮡ
] button (up to
10 characters).
4
Press the [ENTER/MENU] button to store the device
name in memory.
●The setting is refreshed and the name menu display is
restored.
ⅢPress the [ESC] button to interrupt editing and restore the
previous setting.
●The changed setting is canceled and the name menu is
restored.
5
To restore the normal display, press the [ESC]
button.
Display
1, 3 [
ᮡ
] button
2, 4 [ENTER/MENU] button
3 [–] button
1
,
3
[
ᮢ
] button
3 [+] button
4, 5 [ESC] button
Name menu display
Edit mode
Cursor
ENTER/MENU
ESC
ENTER/MENU