Filter
Top Products
16
The various features of this unit can be set using the menu. The setting value, which is stored in the
internal memory will reappear upon turning on the power.
Ⅵ Example
Remote control of this unit
can be achieved by using
the RS-232C terminal on
the rear panel.
[Configuration Menu]
≠
[Initial Param Menu]
≠
[Control Mode]
≠
“Remote”
Operation Flow Chart Display Flow Chart
Do not turn off the power
switch during “Now Initializ-
ing” display.
The setting value may not
be saved or may return to
default setting.
The Operate Param Menu
setting will be reflected in
the output even if “Save &
Reboot” is not executed.
Main Menu
+Configuration Menu
Main Menu
+Configuration Menu
Configuration Menu
+Operate Param Menu
Configuration Menu
+Initial Param Menu
Initial Param Menu
>Control Mode :Local
HDTV ENCODER
DM-JV600U
Initial Param Menu
>Control Mode: Local
Initial Param Menu
>Control Mode:Remote
Initial Param Menu
>Save & Reboot ?
..Now Initializing..
How to Change Menu Setting
MemoMemo
CautionCaution
Press the ENTER button
Main Menu screen will be displayed.
Press the 8 / 9 buttons
Select the Configuration Menu.
Press the ENTER button
Configuration Menu screen will be displayed.
Press the 8 / 9 buttons
Select the Initial Param Menu.
Press the ENTER button
Initial Param Menu screen will be displayed.
Press the 8 / 9 buttons
Select the Control Mode item and press the ENTER button.
Press the 8 / 9 buttons
Select the “Remote” and press the ENTER button.
Press the ESC button
Press the ENTER button
POWER
ON
OFF
POWER
FAULT
MULTI FORMAT
HIGH DEFINITION
TELEVISION
ENCODER
ENTER ESC
Display 8 / 9 / ; / :buttons
ENTER
button
ESC
button