Filter
Top Products
18
There are 2 ways to start the encoding. One is to start the encoding automatically and the other one
is to start it manually by setting the menu.
Operation Flow Chart Display Flow Chart
The default setting of the
Start Mode item is set to
“Auto” in order to start the
encoding automatically.
☞ Page 13 “Start Mode
item”
The encoding can be man-
ually started or stopped if
the Start Mode item in the
menu is set to “Manual”.
☞ Page 19 “Start the
encoding manually”
HDTV ENCODER
DM-JV600U
Initial Param Menu
>Control Mode :Local
Initial Param Menu
>Start Mode :Auto
Initial Param Menu
>Start Mode :Auto
Initial Param Menu
>Save & Reboot ?
Starting the Encoding
POWER
ON
OFF
POWER
FAULT
MULTI FORMAT
HIGH DEFINITION
TELEVISION
ENCODER
ENTER ESC
Display 8 / 9 / ; / :buttons
ENTER
button
ESC
button
Start the encoding automaticall
y
Press the ENTER button
Display the Initial Param Menu screen according to
steps 1~5 on Page 16 “How to Change Menu Setting”.
Press the 8 / 9 buttons
Select the Start Mode item and press the ENTER but-
ton.
Press the 8 / 9 buttons
Select the “Auto” and press the ENTER button.
Press the ESC button
Press the ENTER button
The encoding will start after the menu setting is saved
and reboot of this unit is performed.
MemoMemo
MemoMemo
..Now Initializing..