JVC DM-JV600U TV Video Accessories User Manual


 
24
The stored error log can be displayed by performing the operation on page 21 “Checking Error Log”.
The error content is displayed by error code.
00 : Feb07 14 : 06 0001
-system boot
a
a: Error log No.
b: Error occurrence date
c: Error occurrence time
d: Error code
e: Error content
*For the error content with plenty of characters, press
the ; / : buttons to scroll the display.
*The date and hour of this unit is adjusted to Green-
wich Mean Time (GMT).
Error code:Error content
0001:
system boot
0020:
communication error
0021:
command parameter error
0022:
command busy
0040:
sync input error
0041:
sync input error recover
0050:
sync no input timeout error
0080:
enc hardware video input error
0081:
enc hardware video input error recover
0084:
enc hardware audio input error
0085:
enc hardware audio input error recover
0088:
enc hardware resync
Cause of error
Restart of this unit has been performed.
The communication error caused by control
device communication has occurred.
The value of command and parameter created
by control device communication is abnormal.
This unit has received action command
when it is busy.
The synchronized signal cannot be de-
tected.
The detection of the synchronized signal
has timed out when this unit restarts.
The video input signal is abnormal.
The audio input signal is abnormal.
Resync process has occured when syn-
chronizing to video input signal.
Troubleshooting
Confirm the connection to external
device.
Confirm the setting of external de-
vice.
Confirm the connection to external
synchronized signal generator and
the synchronized signal itself.
Confirm the connection between
HD-SDI IN terminal and connected
device.
Confirm the signal input into HD-
SDI IN terminal
Confirm the connection between
AES/EBU IN terminal and con-
nected device.
Confirm the signal input into AES/
EBU IN terminal.
Confirm the connection between HD-
SDI IN terminal and connected
device(Frequent reconnection of the
connector may cause the error).
Confirm the signal input into HD-SDI IN
terminal.
Error Log
Displa
y
Error cod
e
b c de