Filter
Top Products
19
Basic operation
Operation Flow Chart Display Flow Chart
Ⅵ Set the Start Mode item
in the menu to “Manual” ac-
cording to the procedure on
☞ Page 18 “Start the
encoding automati-
cally”.
Operation Flow Chart Display Flow Chart
The encoding will stop if menu
item has been changed dur-
ing manual encoding and
“>Save&Reboot” has been
excecuted.
Start the encoding manually
once again.
Main Menu
+Configuration Menu
Configuration Menu
+Operate Param Menu
Operate Param Menu
VideoRate:20000kbps
Operate Param Menu
>Start?
Main Menu
+Configuration Menu
Configuration Menu
+Operate Param Menu
Operate Param Menu
VideoRate:20000kbps
Operate Param Menu
>Stop?
Start the encoding manuall
y
Stop the encoding manuall
y
Press the ENTER button
Main Menu screen will be displayed.
Press the 8 / 9 buttons
Select the Configuration Menu and press the ENTER
button.
Press the 8 / 9 buttons
Select the Operate Param Menu and press the EN-
TER button.
Press the 8 / 9 buttons
Select the Stop item and press the ENTER button.
Press the ENTER button
Stop the encoding.
Press the ENTER button
Main Menu screen will be displayed.
Press the 8 / 9 buttons
Select the Configuration Menu and press the ENTER
button.
Press the 8 / 9 buttons
Select the Operate Param Menu and press the EN-
TER button.
Press the 8 / 9 buttons
Select the Start item and press the ENTER button.
Press the ENTER button
This starts the encoding.
MemoMemo