Filter
Top Products
28
Specifications
General
Model name DT-V21G11Z
Type MULTI FORMAT LCD MONITOR
Screen size Type 21 wide format
Aspect ratio 16:9
Compliant video signal format
☞ “Available signals” on page 29
Format 3G SDI
DUAL LINK HD SDI
HD SDI
SD SDI
EMBEDDED AUDIO
:
:
:
:
:
SMPTE424M/SMPTE425M
SMPTE372M
BTA S-004C, SMPTE292M
ITU-R BT.656: 525/625
SMPTE259M: 525
SMPTE299M, SMPTE272M
Audio output Internal speaker: 1.0 W + 1.0 W
Operation environment Operating temperature: 5°C – 35°C (41°F – 95°F)
Operating humidity: 20% – 80% (non-condensing)
(Slightly variable depending on ambient conditions for installation.)
Power requirements AC 120 V/AC 220 – 240 V, 50 Hz/60 Hz
Rated current 0.6 A (AC 120 V)
0.4 A (AC 220 – 240 V)
External dimensions (excluding protruding
parts)
with the stand without the stand
Width: 515 mm (20 3/8˝) 515 mm (20 3/8˝)
Height: 387.8 mm (15 3/8˝) (High)
352.5 mm (14˝) (Low)
347 mm (13 3/4˝)
Depth: 199 mm (7 7/8˝) 99.8 mm (4˝)
Mass 7.9 kg (17.4 lbs) (with the stand) 6.1 kg (13.4 lbs) (without the stand)
Accessories AC power cord × 1, Power cord holder × 1, Screw × 2 (for power cord holder)
LCD panel
Type 21˝ wide, active matrix TFT
Effective screen size Width: 475 mm (18 3/4˝) Height: 267 mm (10 9/16˝) Diagonal: 545 mm (21 1/2˝)
Number of pixels displayed 1920 × 1080
Number of colors displayed 16.70 million
Contrast ratio (TYP.) 1000:1
Input/output terminals
Video
DVI-D (HDCP)
DVI-D signal input (compatible with HDCP): DVI-D connector x 1 (compatible with DDC2B)
E. AUDIO 3G SDI/HD SDI/SD SDI (IN 1)
Digital signal input (compatible with EMBEDDED AUDIO/DUAL LINK signals):
Auto detection, 2 line, BNC connector x 2
E. AUDIO 3G SDI/HD SDI/SD SDI (IN 2)
E. AUDIO 3G SDI/HD SDI/SD SDI
(SWITCHED OUT)
Digital signal output (compatible with EMBEDDED AUDIO signals):
1 line switched out, BNC connector x 1
VIDEO
Input/output of composite signal:
1 line, BNC connector x 2,
1 V (p-p), 75 Ω
* The input (IN) and output (OUT) terminals are bridgeconnected (auto termination).
COMPO. (Y, PB/B-Y, PR/R-Y)
Input/output of analog component signal:
1 line, BNC connector x 6
Y: 1 V (p-p), 75 Ω
P
B/B-Y, PR/R-Y: 0.7 V (p-p), 75 Ω
* The input (IN) and output (OUT) terminals are bridgeconnected (auto termination).
Audio
AUDIO (IN)
Analog audio signal input: 1 line, RCA connector x 2, 500 mV (rms), high impedance
AUDIO (MONITOR OUT)
Analog audio signal output: 1 line, RCA connector x 2, 500 mV (rms)
External control
REMOTE (MAKE/TRIGGER)
☞ “Using the MAKE/TRIGGER system” on page 22
REMOTE (RS-485)
☞ “Using the serial communication” on page 24
REMOTE (RS-232C)