JVC HD-65S998 Projection Television User Manual


 
19
Quick Setup
TV Side Panel
Speaker Speaker
Amplifier
L
R
AUDIO
OUTPUT
1) Connect a white cable from the LEFT AUDIO OUTPUT on the side of the TV to the
LEFT AUDIO INPUT on the amplifier.
2) Connect a red cable from the RIGHT AUDIO OUTPUT on the side of the TV to the
RIGHT AUDIO INPUT on the amplifier.
Notes:
• Refer to your amplifier’s manual for more information.
• You can use AUDIO OUTPUT for your home theater system.
• You can not output audio using the AUDIO OUTPUT under the following conditions:
1) When you have digital sound from an HDMI device connected to the INPUT-1 or
INPUT-2 connection on the side of your TV. (See page 21).
2) When you have analog sound from a DVI device connected to the AUDIO IN "INPUT-1"
connection. (See page 20).
Connecting to an External Amplifier
Connecting to an amplifier using your optical output
You can connect an amplifier that has an optical digital input terminal by using an optical digital
cable from the optical output. The signal that is output can be PCM or DOLBY DIGITAL.
TV Side Panel
Amplifier
OPTICAL OUT
Digital Audio
1) Connect the optical cable from the side of the TV to the back of the amplifier.
Notes:
• This terminal can only output digital audio.
• In order to use the optical output connection, select PCM or DOLBY DIGITAL on Digital
Sound in the Digital Setup Menu. See page 50.
• Refer to your owners manual on using your amplifier.
LCT2172-001C-A English.indd 19LCT2172-001C-A English.indd 19 3/26/07 8:59:13 AM3/26/07 8:59:13 AM