Filter
Top Products
61
Perform steps 1 and 2 of "Storing Channels Manually" on
page 60 to access the Confirmation screen before continuing.
Change Station Preset
Position
SELECT ITEM
1
Press %fi
@ #
until the item you want to move begins
blinking. Then press OK and the station name (ID) and
its channel (CH) number begin blinking.
SELECT NEW POSITION
2
Press %fi
@ #
to move the station to the new preset
position, then press OK.
Example: If you moved the station in position 4 to
position 2, the stations originally in positions
2 and 3 each move down one space.
● Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION SCREEN
3
Press MENU.
SELECT ITEM
1
Press %fi
@ #
until the item you want to delete begins
blinking.
DELETE CHANNEL
2
Press .
● The item directly beneath the cancelled one moves
up one line.
● Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION SCREEN
3
Press MENU.
Delete A Channel
Perform steps 1 and 2 of "Storing Channels Manually" on
page 60 to access the Confirmation screen before continuing.
Perform steps 1 and 2 of "Storing Channels Manually" on
page 60 to access the Confirmation screen before continuing.
SELECT CHANNEL TO FINE-TUNE
1
Press %fi
@ #
until the channel you want to tune begins
blinking.
ACCESS MANUAL
CHANNEL SET SCREEN
2
Press OK twice. The Manual Channel Set screen
appears.
PERFORM TUNING
3
Press
#
until "+/–" begins blinking, then press %fi until
the picture is clearest. Then press OK.
● The Confirmation screen appears.
● Repeat steps 1 through 3 as necessary.
CLOSE CONFIRMATION SCREEN
4
Press MENU.
Fine-Tuning Channels
Already Stored
PR CH ID PR CH ID
01 26 BBC1 08 ––––
02 23 ITV 09 ––––
03 30 CH4 10 ––––
04 33 BBC2 11 ––––
05 37 CH5 12 ––––
06 –––– 13 ––––
07 –––– 14 ––––
[
5
∞
] : MOVE
: MANUAL CH SET
[MENU] : EXIT
PR CH ID PR CH ID
01 26 BBC1 08 ––––
02 33 BBC2 09 ––––
03 23 ITV 10 ––––
04 30 CH4 11 ––––
05 37 CH5 12 ––––
06 –––– 13 ––––
07 –––– 14 ––––
[
5
∞
] : MOVE =
[MENU] : EXIT
5
5
5
5
ATTENTION
If channel positions are changed or deleted, the Guide
Program numbers that have been set are reset.
● Example 1:If a channel is deleted, all the Guide Program
numbers are reset.
● Example 2:If a channel is changed from position 4 to
position 2, the Guide Program numbers
above position 4 are reset.
● Example 3:If a channel is changed from position 4 to
position 6, the Guide Program numbers
above position 6 are reset.
* In Examples 2 and 3, if the channel is moved to position
10 before OK is pressed, the Guide Program numbers
above position 10 are reset.
If an attempt is made at timer programming with VIDEO
Plus+ in this state, the “GUIDE PROG SET” screen
appears; set the Guide Program numbers on this screen.
੬ “ATTENTION – Regarding Guide Program Number
Set” on pg. 19.
Or perform “Guide Program Number Set” (੬ pg. 65).