JVC HR-470 VCR User Manual


 
Filename [HRJ670EU1.fm]
Masterpage:Left
14
EN
SAT CONTROL SET (cont.)
Setting satellite receiver's brand and
channel
After installation, set the satellite receiver’s brand and
channel correctly; otherwise, the Satellite Controller
cannot work correctly.
A
Turn on the satellite receiver.
Turn on the satellite receiver’s power.
B
Access the Main Menu screen on the
recorder.
Press
MENU
.
C
Access the Initial Set screen.
Press
rt
to move the highlight bar (pointer) to “INITIAL
SET”, then press
OK
or
e
.
D
Access the Sat Control Set screen.
E
Enter the satellite receiver’s brand.
Press the appropriate
NUMBER
keys to enter the brand code
from the list on page 15, then
press
OK
.
If the brand code you entered is
invalid, the code field will be
reset. Enter the correct brand
code again.
If the recorder is in playback or
recording, you cannot set the
brand code.
F
Select the satellite receiver’s channel.
Press the appropriate
NUMBER
keys to enter the channel
position on the satellite
receiver, then press
OK
.
You can select the channel
position between 1 to 999.
After pressing
OK
, the recorder
enters the Test mode.
Turn on the TV and select the video channel (or AV
mode).
Press
rt
to move the
highlight bar (pointer) to
“SAT CONTROL SET”, then
press
OK
or
e
.
HRJ670EU1.fm Page 14 Thursday, December 9, 1999 3:48 PM